ALEXANDER ENGEL KG - engel modellbau -/- R/C -/Speed Controllers/ESC brushed products

ROBUST ESC 8A 30V 48,00 €

Thu, 05 Mar 2026 12:31:35 +0100

The name says it all:
The aim of the development of this electronic speed controller (ESC) is to provide practical,
easy-to-use units that can be used in submarines and scale ships.

Robust means that they react well to the rudeness of everyday life such as short circuit or blocked engine instead of burning.
This is largely achieved by using modern power semi-conductors with built in current limit and thermal overload protection.

The brain of the controller is a microprocessor. So noise filtering, transmission failure detection and variable motor frequency are standard.
To keep usage easy and straight forward no adjustments are necessary. Zero and full throttle can be set on the transmitter.

This ESC is short circuit proof by current limiting to 40 A and fast, reversible over temperature shut down.

TECHNICAL DATA
nominal voltage            7.2 - 17 V
under voltage lock out   4.5 V
over voltage lock out    19 V
continuous current       9 A
short time current       12 A for 3.5 min.
input signal center         1.5 ms
full throttle                    1.1 or 1.9 ms
output signal variable frequency
(sigma-delta-modulation max. 900 Hz)

dimensions approx. 50 x 30 x 16 mm
weight approx. 15 g

MARINE 60R 60A 29,70 €

Fri, 07 Nov 2025 01:54:43 +0100

Speed controller for brushed motors type 540, 550, 560.
Quite robust construction, with adjustment via jumpers.

3 Control Modes (set by jumper)
• forward - push to brake - reverse
• forward - brake - reverse
• forward - center trigger to brake - reverse

2 battery modes (set by jumper)
• LiPo
• NiMH

Technical data
Operating voltage 2-3S LiPO
5-9 cells NiMH
Continuous current 60 A
Short-term current 240 A for 3 seconds

Dimensions approx. 38 x 32 x 21 mm

Weight approx. 40 g

Rookie 20 TAM 6-12V 79,95 €

Thu, 21 Nov 2024 00:56:24 +0100

Electronic speed controllers for model boats and cars with standard 540 (or smaller) motors and tuned motors up to 16 winds.
Features full reverse mode and dynamic brake.
Micro-processor controlled, with high motor pulse frequency.
Special arrangement of dynamic brake and reverse stage avoids premature gearbox wear.

Technical Features:
• Forward - stop - dynamic brake - reverse
• Fine, proportional speed control
• High motor pulse frequency (hec)
• Fine control at start-up
• High-flex silicone cables
• High-capacity BEC power supply
• Zero-wear output stage
• Overheating guard (TP)
• POR - power-on guard
• PCO - low voltage cut-off
• RX filter - switches off the controller if transmitter signal fails or is invalid
• Acrylic lacquer seal for splashproofing (WP)

Ultra-simple programming of the ranges forward, stop, dynamic brake and reverse. Just one input button and LED monitor.

Technical Specifications:
Operating voltage 6-12 Volts
Cont. current 20 A (2200 mAh)
Momentary 25 A
BEC 5V. 1.2A
Connector system 1.5 sqmm
Dimensions 46x37x25 mm
Weight approx. 60 g