ALEXANDER ENGEL KG - engel modellbau -/RC Submarines/Typhoon products

TYPHOON TK-208 MasterScale- TAE SET 2.698,00 €

Tue, 28 Apr 2026 18:41:52 +0200

This SET includes all technical components required to built a fully functional TYPHOON! Except glues and batteries.

LIMITED EDITION - we can supply this special set in a very limited quantity only.
Offer ends Dec. 28, 2025. Or as long as stock lasts. Either or...

• Upper and lower hull, conning tower and pressure proof compartment made of glass fibre
• Fins, rudders and dive planes ready-made
• Complete set of fittings
• CNC machined Tech Carrier
• Ready-to-run main drive with twin-motors
• Props, prop shafts and couplings made of brass
• Electric mechanism for retracting the front dive planes with electronic switch unit RMR
• All necessary accessories (such as links, screws etc.)
• Ballast (lead)
• Instructions and the plans in ENGLISH, 2 sheets fully detailed and drawn 1:1, as well as additional drawings (also in 3-D)
• Complete Dive System type TAE including 2 Piston Tanks with HALL Sensors (with 825ml volume each), Switch Unit TAE3 with Pressure Switch and all necessary hosings and connectors.
+
• Static Depth Controller TAES
+
• Conning Tower Mechanism with retractable periscopes and antennas, includes electronic switch unit TMS
+
• Side Thruster with electric motor
+
• Dual Pitch Control DLx2
+
• 2 Elecronic Speed Controllers (ESC)
• DUO SWITCH POWER (for bow thruster)
+
• 3 digital servos with ball bearing and metal gears
+
• Magnetic On-/Off-Switch 6V/16A (for main drive battery)
• Switch Module Rx 2A (for receiver battery)
• Neodyme Magnet
+
• Boat Stand made of Plexiglas® and stainless steel.
+
• TYPHOON Super-Scale brass photo etch set
+
• RC-System TX16S transmitter (Tx) with 12-channel receiver (Rx) RBC-12868-T. Ready-to-run.*

NEW version with TAE3 and HALL Sensors.

* Please note: Due to shipping restricitons batteries are not included in this kit.

Boat Stand TYPHOON TK-208 98,00 €

Thu, 05 Mar 2026 12:26:14 +0100

This boat stand has been made especially for the TYPHOON TK-208.

The stand is made of CNC cut, clear 8 mm acrylic glass, two brushed tubes (dia. 40 mm) as well as threaded rods M10, steel cap nuts and washers, all made of stainless steel. Self adhesive rubber tape is also included.

Very easy assembly and very, very durable.

Weigth approx. 2.5 kg
Overall lenght approx. 500 mm

Bow Thruster for TK-208 TYPHOON - new version 98,70 €

Thu, 05 Mar 2026 12:26:11 +0100

NEW VERSION with improved thruster and strong 540 motor.

This side thruster is designed to suit TK-208 TYPHOON, thereby making this model well maneuverable. Fitted with this option, the TYPHOON can be turned almost on the spot.

The electric motor is located within the middle deck and mounted to the inner side of the bulk head at bow. The motor is ready fitted with an 4mm shaft which protrudes the dry section of the model through the bulk head. The second shaft is fitted to the impeller within the thruster. This shafts connects to the motor shaft via a brass coupler.
The middle tube extension is fitted to the thruster with two silicone tubings, thereby allowing easy removal of the thruster from the hull.

This new thruster version allows long operating times for full turns without pausing!

Set includes:
• Electric Motor fitted with mounting plate and 4mm shaft
• Side thruster fitted with 4mm shaft
• Brass coupler 4-4mm with grub screws
• Extension tubes
• Extension tube support
• Silicone tubing
• Drawing in 3-D

Technical Specifications:
• Operating voltage range 3-9V (nominal 6V)
• Revolutions (no-load) 11,600 RpM
• Current (no-load) 1.0 A

TYPHOON TK-208 MasterScale with Diving System TAE 1.798,00 €

Tue, 10 Mar 2026 10:46:53 +0100

The Typhoon with Diving System TAE includes:
• Upper and lower hull and pressure proof compartment (with steel reinforcements) made of glass fibre
• Conning tower, fins, rudders and dive planes cast in resin
• Complete set of fittings cast in resin
• Ready-to-run twin-motor drive unit
• Props, prop shafts and couplings made of brass
• Mechanism for retracting the front dive planes with electronic switch unit RMR
• All necessary accessories (such as links, screws etc.)
• Ballast (lead)
• Instructions and the plans in ENGLISH, 2 sheets fully detailed and drawn 1:1, as well as additional drawings (also in 3-D)
• Complete Dive System type TAE including 2 Piston Tanks with HALL Sensors (with 825ml volume each), Switch Unit TAE3 with Pressure Switch and all necessary hosings and connectors.

NEW VERSION WITH IMPROVED INTERNAL SETUP.

Conning Tower Mechanism for TK-208 TYPHOON 219,00 €

Thu, 05 Mar 2026 12:26:11 +0100

This feature extraction/retraction of the periscope, radar and antenna in and out of the conning tower.

The kit includes all necessary components including electric motor as well as comprehensive instructions and drawings in English.

NEW! Now with electronic switch unit TMS.
The scope of delivery of the mechanism includes electronic control unit TMS (no. 8441) which is connected directly to the receiver.
This means that no further intermediare component is required.
The TMS is controlled on the transmitter side with a switching channel with three positions (on-off-on).

TYPHOON TK-208 MasterScale- TAE SET 1.998,00 €

Wed, 29 Apr 2026 20:47:41 +0200

The TYPHOON SET includes:

• Upper and lower hull, conning tower and pressure proof compartment made of glass fibre
• Fins, rudders and dive planes ready-made
• Complete set of fittings
• CNC machined Tech Carrier
• Ready-to-run main drive with twin-motors
• Props, prop shafts and couplings made of brass
• Electric mechanism for retracting the front dive planes with electronic switch unit RMR
• All necessary accessories (such as links, screws etc.)
• Ballast (lead)
• Instructions and the plans in ENGLISH, 2 sheets fully detailed and drawn 1:1, as well as additional drawings (also in 3-D)
• Complete Dive System type TAE including 2 Piston Tanks with HALL Sensors (with 825ml volume each), Switch Unit TAE3 with Pressure Switch and all necessary hosings and connectors.
+
• Conning Tower Mechanism with retractable periscopes and antennas, includes electronic switch unit TMS
+
• Side Thruster with electric motor
+
• Dual Pitch Control DLx2
+
• 2 ROOKIE 35 Elecronic Speed Controllers
• DUO SWITCH POWER (for bow thruster)
+
• 3 digital servos with ball bearing and metal gears
+
• Magnetic On-/Off-Switch 6V/16A (for main drive battery)
• Switch Module Rx 2A (for receiver battery)
• Neodyme Magnet
+
• Boat Stand made of Plexiglas® and stainless steel.

NEW version with TAE3 and HALL Sensors.

Plans and manual TK-208 TYPHOON 30,00 €

Wed, 29 Apr 2026 17:32:54 +0200

This set includes the two plans, manual and additional drawings for model submarine TK-208 TYPHOON.

Price (w/o postage) will be refunded with purchase of the complete kit (within 12 months).

TYPHOON Scale 1/100 Super Scale brass photo etch set 197,60 €

Wed, 29 Apr 2026 20:47:41 +0200

Set with over 300 photo etched brass parts for model submarine TYPHOON scale 1/100.

Includes about 300 grids for flood vents, hatch covers and other detailled attachments.

Brass thickness 0,15 mm with extreme detail.

Sheet size approx. 150 x 290 mm

Includes drawings and photos for installation.

Made in Germany