If you don't get an e-mail with your access data, please make sure that you have already registered with us. As soon as you are registered, you can login with your e-mail address and your password.
In case you still have problems logging in, please turn to us by e-mail: info@engel-modellbau.eu
Machined brass part, nickel plated, with integrated O-ring for sealing linear linkages (i. e. push rods) with a diameter of 2.5 to 3.1 mm.
For application with smaller rod diameters (such as 2 mm) only a brass tube with outer diameter 3 mm must be pushed over the rod and soldered or glued to the rod as shown.
With hexagonal body and M6 thread for easy installation. Can either be glued or screwed; O-ring for sealing the M6 thread is also included.
Not suitable for fast rotating shafts (e.g. drive or prop shafts).
Grease O-ring with Q-Lube (item no. 9705) or similar dedicated lubricant for minimal friction, maximum seal and durability.
Dimensions:
Total length approx. 20 mm
Length of thread 6,5 mm
Thread M6
Wrench size 9 mm,
Pack of 1